Waterhog Impressions HD (Custom Logo Mats)
Free U.S. shipping
Waterhog Impressions HD mats feature your custom logo or artwork printed on a hybrid application where the surface can scrape and dry your feet while being able to with stand extremely high traffic.
For indoor/outdoor use in covered areas
Revolutionary, HD digital printing
Features 56 standard color options
Water dam border holds up to 1.5 gallons of water per square yard
Hybrid mat - Great for scraping & drying shoes
Easy to clean - vacuum or hose off
SURFACE
Material: PET (polyethylene terephthalate)
Weight: 30 ounces/yard2
Construction: Needle-punched
Design: Squares
BACKING
Material: Nitrile rubber - smooth or universal cleated
Thickness: 65-mil (body thickness 65-mil; border thickness 155-mil)
OVERALL THICKNESS: 3/8 inch (0.375")
STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes DOC-FF1-70 for the surface flammability of carpets
Cleaning Instructions
WaterHog Impressions HD mats can be cleaned using the instructions below.
Vacuum regularly (daily in high-traffic commercial areas; weekly in lower traffic areas).
Extract or hose off as needed to remove heavy soil/debris. Hang mat to dry.
Always make sure the mat is dry before placing it back in service.
Design Specs
WaterHog Impressions HD logo mats are produced using a layering process of color. Colors are matched to our standard pallet of 56 colors.
Minimum Text Height: 1.5"
Minimum Line Thickness: 1/4"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
Light background colors should be avoided due to their tendency to show dirt on the mat more than a darker or neutral tone. Tints, screens, and transparencies are not supported and should not be used.
